• fuel oil meters forOEMs (originai equipment manufacturers),to be mounted under the burner cover • meters with lateral internai threaded connections • with 230 V Reed pulserto display measurement values on remote totaliser or on burner control unit • for mounting in horizontal, vertical orinclined positions CONTOIL® flow meters work on the volumetrie principle of rotary pi- ston meters (positive displacement meters).The main features ofthis me- asuring principle are large measuring ranges, high accuracy suitability for high viscosities and independence from power supply; flow disturbances do not influence proper operation. Rotary piston, guide roller and drive are the only moving parts in contact with the liquid.Their movement is transmitted by a magnetic coupling through a sealing plate.The hydraulic part is completely separated from the totalising module. Measuring error limits: Reference conditions Measuring error limits according to technical data of meter in % of actual value for the whole measuring range. Reference conditions Calibration oil similar to extra light heating oil, density at 20 °C = 814 kg/m3 Viscosity = 5.0 mm2/s according to DIN 51757 / ISO 3104 (corresponds to 4.1 mPa.s) Horizontal mounting, readings from counter CONTOIL® Oil meters are neverto be tested with water; otherwise they will get damaged. Flow rate Housing/Measuring unii Housing with threaded ends Cast brass Spheroidal graphite iron GJS 40 Housing with flanges Measuring chamber Spheroidal graphite iron GJS 40 Cast brass Stainless steel Rotary piston Anodized aluminium Ancil laries Riels Instruments Srl. TS +39 049 8961771 - A +39 049 7l7368 .www.riels.it. info@riels.it
Aprire il catalogo a pagina 1Technical data Nominai diameter Connection threads of meter Nominai pressure Maximum flow rate Nominai flow rate Minimal flow rate Approx. starting flow rate Safetyfilter mesh size Diri filter mesh size Volume of the measuring chamber Reed pulsers Pulse frequency 2) For burners and engines or motors, the meter must be selected on the basis of the permanent flow rate. For higher viscosities, or if the meter is installed on the suction side, the pressure drop and any reduction in the measuring range must also be taken into consideration Safety precaution When connecting the Reed pulserto a...
Aprire il catalogo a pagina 2Power supply: Pulse value (input): Smallest readable amount: Registratori capacity: Panel cut-out: Installation depth: at Q before return to zero 200 h Pressure drop curves Viscosity information Kinematic viscosity__Stokes, Centi-Stokes, mm2/s_St, cSt, mm2/s Pascal seconds, millipascal seconds_Pas, mPa.s Dynamic viscosity Poise, Centipoise (outmoded)_ P, cP Engler degrees °E to mPa.s: only use conversion table Saybolt units to mPa.s: only use conversion table Redwood units to mPa.s: only use conversion table Ruleofthumb 1 cSt -. ImmVs-. 1 mPa.s Viscosity diagrams: A — 5 mPa.s C— lOOmPa.s E...
Aprire il catalogo a pagina 32 Pagine
2 Pagine
1 Pagina
2 Pagine
2 Pagine
2 Pagine
1 Pagina
2 Pagine
1 Pagina
6 Pagine
2 Pagine
3 Pagine
6 Pagine
21 Pagine
3 Pagine
3 Pagine
16 Pagine
3 Pagine
2 Pagine
1 Pagina
1 Pagina
22 Pagine
2 Pagine
2 Pagine
2 Pagine
2 Pagine
4 Pagine
7 Pagine
7 Pagine
4 Pagine
3 Pagine
3 Pagine
5 Pagine
5 Pagine
2 Pagine
2 Pagine
2 Pagine
3 Pagine
1 Pagina
2 Pagine
8 Pagine
4 Pagine
3 Pagine
3 Pagine
8 Pagine
4 Pagine
1 Pagina
13 Pagine
2 Pagine
3 Pagine
3 Pagine
2 Pagine
4 Pagine
2 Pagine
6 Pagine
5 Pagine
2 Pagine
2 Pagine
5 Pagine
1 Pagina
2 Pagine
2 Pagine
2 Pagine
3 Pagine
2 Pagine
1 Pagina
24 Pagine
2 Pagine
13 Pagine
1 Pagina
1 Pagina
4 Pagine
2 Pagine
2 Pagine
2 Pagine
1 Pagina
3 Pagine
2 Pagine
1 Pagina
3 Pagine
2 Pagine
62 Pagine
3 Pagine
5 Pagine
13 Pagine
4 Pagine
7 Pagine
1 Pagina
2 Pagine
3 Pagine
2 Pagine
3 Pagine
8 Pagine
12 Pagine
7 Pagine
7 Pagine
4 Pagine
13 Pagine
1 Pagina
1 Pagina
1 Pagina
4 Pagine
5 Pagine
6 Pagine
6 Pagine
64 Pagine
3 Pagine
5 Pagine
6 Pagine
6 Pagine
15 Pagine
2 Pagine
4 Pagine
3 Pagine
1 Pagina
3 Pagine
2 Pagine
7 Pagine
9 Pagine
1 Pagina