UBM63 Unità di bloccaggio UNIVERSAL UB = Unità di bloccaggio UNIVERSAL con regolazione continua angolo d’apertura da: 0° a 135° Max M = Pneumatica con leva manuale L’angolo di apertura può variare a seconda della posizione e della tipologia del pressore UNIVER GROUP 5 Tipo di pressore N = Senza pressore = Centrale, 15 mm offset (standard) N = Senza sensore = Destro, 15 mm offset (standard) (con piastra di chiusura) = Sinistro, 15 mm offset (standard) E = Sensore elettronico con = Centrale, 45 mm offset connettore M12 orientabile = Destro, 45 mm offset D = Sensore pneumatico = Sinistro, 45 mm offset = Senza pressore = Centrale con fori maggiorati ø 8 H7, 15 mm offset = Destro con fori maggiorati ø 8 H7, 15 mm offset = Sinistro con fori maggiorati ø 8 H7, 15 mm offset T = Centrale con fori maggiorati Ø 8 H7, 45 mm offset U = Destro con fori maggiorati Ø 8 H7, 45 mm offset V = Sinistro con fori maggiorati Ø 8 H7, 45 mm offset

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT *** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVMax. operatlng pressure: 0,4 / 0,6 MPa Opening angle: adjustable With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operatlng pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

_>_ UNIVERSAL Pneumatic power clamp with manual lever I' 37 'I arm at 45 mm from pivot point (arm style E-L-F) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operatlng pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on...

_>_ UNIVERSAL Pneumatic power clamp with manual lever I' 37 'I arm at 45 mm from pivot point (arm style V-T-U) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operatlng pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on...

UNIVERSAL Pneumatic clamp with manual lever (arm styleX-Y-Z) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operatlng pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT * * * * : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

UNIVERSAL Pneumatic power clamp with manual lever arm at 45 mm from pivot point (arm style E-L-F) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

UNIVERSAL Pneumatic power clamp with manual lever arm at 45 mm from pivot point (arm style V-T-U) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

UNIVERSAL Pneumatic clamp with manual lever (arm styleX-Y-Z) MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vellicai arm mount position With manual lever Electronic sensor with M12 swh/el connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT *** : AREA TO ACCES ANGLE ADJUSTMENT * * * * : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications wlthout notice